A single wood screw driven into a stud holds roughly 100 pounds. The stud itself carries thousands of pounds, so the wood is never the weak link. The metal you drive into it is.
Search how much weight can a stud hold and you get 20 pounds, 100 pounds, 529 pounds, and 7,000 pounds. Every one is correct, and none of those pages tells you which question it answered.
Ready-mixed joint compound, the stuff in the plastic tub, needs about 24 hours per coat. Setting-type compound, the powder you mix out of a bag, can go hard in as little as ten minutes.
Both are true. Neither is the answer you came for.
You are staring at dated wallpaper, roller in hand, wondering if you can skip the miserable job of stripping it.
So, can you paint over wallpaper? Yes, you can, but only when the paper is smooth, firmly stuck down, and you prime it with the right primer first.
Most spackle is ready to sand or paint in 1 to 5 hours. Fast-dry formulas take paint in as little as 15 minutes.
How long does spackle take to dry depends on three things the charts online ignore: which tub is in your hand, how deep the hole is, and what kind of paint is going over it.
A drywall anchor can hold anywhere from about 5 pounds to more than 250 pounds. The mechanism inside the wall decides it, not the drywall itself.
How much weight a drywall anchor can hold depends almost entirely on the type you buy. A cheap plastic anchor gives up around 25 pounds. A metal strap toggle in half-inch drywall can take 250 pounds or more before it fails.
Stick it to the wall, hang your art, walk away. Then it hits the floor at 1 a.m.
If you have ever wondered how much weight can Command strips hold, the honest answer runs from about half a pound to 20 pounds, depending entirely on which product you grab.
You taped off the room, rolled on a coat of primer, and now you are standing there with a loaded brush wondering if it is safe to start painting.
How long does primer take to dry usually comes down to one number. Most primers are dry to the touch in 20 to 35 minutes and ready to paint over in about an hour.
Most caulk is dry to the touch in about 30 minutes to 2 hours, but it needs a full 24 hours to cure before it meets water or paint, and silicone and polyurethane can need several days. That gap is where people get burned.
How long does caulk take to dry is really two questions: dry to the touch, and fully cured.
You’ve got a stack of old deck boards leaning against the fire pit, and the question is simple: light them up, or haul them off?
No. You should never burn pressure treated wood, not in a fire pit, a wood stove, or a bonfire, and not because the boards are old.
The deck is built, the stain is in your cart, and every answer online gives you a different waiting period.
Thirty days. Six months. A full year.
So can you stain pressure treated wood? Yes, and in most cases you should. The chemical treatment protects the wood against rot and insects, not against sun, water, and cracking.